# H264/H265 encode on PowerVR G6230

**URL:** <https://forums.imgtec.com/t/h264-h265-encode-on-powervr-g6230/2318>\
**Category:** PowerVR Insider\
**Created:** [July 7, 2015, 10:03am UTC](https://forums.imgtec.com/t/h264-h265-encode-on-powervr-g6230/2318 "2015-07-07T10:03:15Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![warpdest](https://avatars.discourse-cdn.com/v4/letter/w/f475e1/32.png) [@warpdest](https://forums.imgtec.com/u/warpdest)\
**Post date:** [July 7, 2015, 10:03am UTC](https://forums.imgtec.com/t/h264-h265-encode-on-powervr-g6230/2318/1 "2015-07-07T10:03:15Z")

</div>

Hi all,

I have question about encoding on that chip. Firstly i interest PowerVR G6230 have drivers for Linux? And if have howto encode h264/h265 on that chip? Where i can get source examples in C?

Best Regards,  
Alex.

---

<div class="post-metadata">

**Author:** ![PaulLy](https://avatars.discourse-cdn.com/v4/letter/p/958977/32.png) [@PaulLy](https://forums.imgtec.com/u/PaulLy)\
**Post date:** [July 7, 2015, 12:01pm UTC](https://forums.imgtec.com/t/h264-h265-encode-on-powervr-g6230/2318/2 "2015-07-07T12:01:51Z")

</div>

Hi Alex,

What board are you working with? You will have to contact the vendor for drivers, and to answer these questions.

---

<div class="post-metadata">

**Author:** ![warpdest](https://avatars.discourse-cdn.com/v4/letter/w/f475e1/32.png) [@warpdest](https://forums.imgtec.com/u/warpdest)\
**Post date:** [July 7, 2015, 4:21pm UTC](https://forums.imgtec.com/t/h264-h265-encode-on-powervr-g6230/2318/3 "2015-07-07T16:21:30Z")

</div>

Hi Paul,

I not have any platform. But for now i looking for allwiner a80, on market have many variants with that chip. Him have PowerVR G6230, but all him use android not linux. I see that linux possible install and use on that platform like ubuntu. But me interest use PowerVR G6230 for full power with encode/decode h264/h265 , i can’t find any info in internet for do that. As i understand u as developer PowerVR G6230 have driver for linux and examples for use encode/decode?

Best Regards,  
Alex.

---

<div class="post-metadata">

**Author:** ![PaulLy](https://avatars.discourse-cdn.com/v4/letter/p/958977/32.png) [@PaulLy](https://forums.imgtec.com/u/PaulLy)\
**Post date:** [July 8, 2015, 9:51am UTC](https://forums.imgtec.com/t/h264-h265-encode-on-powervr-g6230/2318/4 "2015-07-08T09:51:49Z")

</div>

This case is out of the scope of what we can advise here. You will have to contact either Allwinner, who make the devices, or Mediatek, who make the chip.

---

<div class="post-metadata">

**Author:** ![warpdest](https://avatars.discourse-cdn.com/v4/letter/w/f475e1/32.png) [@warpdest](https://forums.imgtec.com/u/warpdest)\
**Post date:** [July 8, 2015, 4:20pm UTC](https://forums.imgtec.com/t/h264-h265-encode-on-powervr-g6230/2318/5 "2015-07-08T16:20:20Z")

</div>

Ok. Thanx.