# PowerVR SDK for TI's OMAP3530 device based on WinCE

**URL:** <https://forums.imgtec.com/t/powervr-sdk-for-tis-omap3530-device-based-on-wince/1701>\
**Category:** PowerVR Insider\
**Created:** [March 11, 2013, 1:30pm UTC](https://forums.imgtec.com/t/powervr-sdk-for-tis-omap3530-device-based-on-wince/1701 "2013-03-11T13:30:05Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![jur](https://avatars.discourse-cdn.com/v4/letter/j/6f9a4e/32.png) [@jur](https://forums.imgtec.com/u/jur)\
**Post date:** [March 11, 2013, 1:30pm UTC](https://forums.imgtec.com/t/powervr-sdk-for-tis-omap3530-device-based-on-wince/1701/1 "2013-03-11T13:30:05Z")

</div>

Hello,  
  
  
  
I’m using hardware device built on OMAP3530 chip. The operating system used is Windows CE 6.0 R3.  
  
  
  
What SDK version I can use? Can I find something newer than 2.08?  
  
  
  
Thank You!

---

<div class="post-metadata">

**Author:** ![tobias](https://avatars.discourse-cdn.com/v4/letter/t/c67d28/32.png) [@tobias](https://forums.imgtec.com/u/tobias)\
**Post date:** [March 14, 2013, 3:12pm UTC](https://forums.imgtec.com/t/powervr-sdk-for-tis-omap3530-device-based-on-wince/1701/2 "2013-03-14T15:12:19Z")

</div>

Hi Jur,  
  
  
  
I’m afraid that we no longer support this operating system, so 2.8 is the only SDK we have available for that platform.  
  
  
  
Regards,  
  
  
  
Tobias

---

<div class="post-metadata">

**Author:** ![jur](https://avatars.discourse-cdn.com/v4/letter/j/6f9a4e/32.png) [@jur](https://forums.imgtec.com/u/jur)\
**Post date:** [March 14, 2013, 10:15pm UTC](https://forums.imgtec.com/t/powervr-sdk-for-tis-omap3530-device-based-on-wince/1701/3 "2013-03-14T22:15:36Z")

</div>

Hi Tobias,  
  
  
  
Thank You for answer.  
  
  
  
Regards,  
  
  
  
jur